Difference between revisions of "CalNex-JG"

Latest revision as of 14:02, 6 August 2010

This page serves as documentation for organization of the Jimenez Group's participation in CalNex-LA. Do not confuse this page with the Main CalNex-LA page or the CalNex-LA Logistics page.

Tasks after CalNex-LA

Repairs & upgrades
- Michael: quote on upgrade of 2x pump boxes (1 w/ 3x V301 controllers + higher rating of cables) & 2x automatic valves for inlet
- Carly: check with Varian on interlock signal on V70-prog_as_V301 controller (now inside pump box controlling pump 5)
- Michael: make sure we have 3x working RH probes and coupling hardware and that they work (working on it)
- Patrick + Amber: fix 3 us offset with PToF in lab AMS (try rebooting multiple times). Talk to Donna about software. (working on it)
- Patrick: calibrate all critical orifices, decide whether we need to order more (Waiting for Art to come back)
- Michael: make a couple more orifice fixtures
- Michael: replenishing O'Keefe orifices and fuses
- Michael: identify big stand-alone tool chest (lockable)
  - Link
  - Lockable
  - Deep and Shallow drawers
  - Ball Bearing drawer slides rated to 70lbs/drawer
  - other stackable components if expansion is ever necessary
- Amber: Check channel 0 in Lab AMS slow board (and another channel)
- Modules are switched between Lab and C TPS.
- follow up on filament problem with TPS software (filament would go down) -- mention to Joel, try to reproduce

Completed Post CalNex-LA Tasks
- Michael: Make map of east campus storage, and store location on group GPS
- Michael: order 1 1000-Torr baratron (1/2" tube connection) for Lab AMS.
- Michael: see when Varian guy is available after IAC (spinning, general pump stuff)
- (Move them here as they are completed, so that we all know that they have been completed)
- Carly: ask Thomas (cc Jose) where do we get special tool to remove module, and whether it is practical.
- Carly: test interlock on HIAPER, it works
- Amber + Patrick: clean lab AMS including fans (in pumps, electronics box, power supply, computer)
- Carly: replace pulser flange
- Carly: Replace MAB pump 5

Tasks in preparation for CalNex-LA

Field kit
- SMPS comparison: Mike, Michael (run, analysis in progress)
- plywood bases for Ingrid's shelving racks? (Michael, confirm with Jose)
- inflatable mattresses (Jose will bring 2)

Organization - Try to have ready by Mar 18 (next business mtg)
- Which AMSs to bring: MAB-AMS + LAB-AMS + C-AMS
- AMS alternation: PAM + TD: on LAB-AMS
  - Ambient: 1min V, 1 min W
  - PAM: same
  - TD: same
  - Need to set up + test Jayne switching valves: Mike + Amber (in progress)
  - concentrator: Sanna will come 1st 2 weeks, she can send concentrator to CU in advance: we will use w/ MAB (Jose, Carly emailing with Sanna)
  - Need a set of valves for concentrator: Carly w/ yellow - Amber will show her
  - Need to be able to step vaporizer temperatures: Carly + Joel
  - Inlet schematic for J-Group instruments: account for all fittings + tubing a priori: (Mike in progress). Include how to test for leaks and flows.
    - logging computers are assigned to instruments - DONE (Mike)
      - TSI software and Labview software can't run on the same computer
- Put together 2x valve filtering system for inlets (3): (Delphine) (valves/tees/etc. found, set aside)
- Which SMPSs
  - One in parallel with Lab-AMS, one in parallel with MAB-AMS, one as shared calibration system (comparison in progress, see above: Ingrid + Michael + Donna)
- OPC: Michael. software updated to report PM1, PM2.5, PM10; Mike has Igor code for analysis (see wiki)
- Radioactive source and chemical inventory and shipping: Michael
  - waiting on Michelle; need to do reciprocity
- Gas requirements (current plan is to bring everything from CU; Carly, Amber will make sure we have it for packing)
  - zero air (1 tank at a time, probably 2 tanks total) - Amber
  - N2 (3 cylinders) - Amber
  - SO2 cal gas - Amber
  - research-grade N2 - Carly
  - research-grade Ar - Carly
  - research-grade Kr (2 lecture bottles) - Carly
- ICARTT sharing file organization (Ingrid + Donna)
  - bother people about adding a sample file or readme saying they won't share data

- Driving our stuff there: Michael will rent truck on Friday, get CIRES parking pass (Penske).
  - pick up truck Saturday, May 1
  - load Sunday, May 2 at 10am Ingrid, Carly, Mike, Amber, Michael, Patrick, Art
  - TO CalNex: Michael + Amber, departing Boulder May 3, arriving Pasadena May 4
  - FROM CalNex: Michael + Mike, departing Pasadena June 18, arriving Boulder June 19

Power Breakdown for Jimenez Trailer at CalNex-LA

Will be updated when power is final - see google doc, ppt for latest

PAM-TD-AMS related instruments
- Circuit 12A: 9.09 A
  - HR-AMS 6.36 A, 700 W instrument
  - Thermo Denuder (TD) 2.73 A, 300W
- Circuit 10B: 8.31 A
  - PAM 6.8 A, 750 W (total, including lamp power supplies, MFCs, O3, RH, and SO2 monitors)
  - Grimm OPC 0.2 A, 20 W
  - TSI DMA #1 0.81 A, 90 W
  - CPC 3010 #1 0.3 A, 33 W
  - DustTrak 0.16 A, 18 W
Shared Circuits
- Circuit 10A: 12.9 A
  - Gast Pump for Perma Pure (by-pass) 5.45 A, 600 W
  - Gast Pump for DT and OPC (by-pass) 5.45 A, 600 W
  - UHSAS 2 A, 220 W
- Circuit 11: 16.35 A (butanol exhaust)
  - Gast Pump (CPC 3010 #1) 5.45 A, 600 W
  - Gast Pump (CPC 3010 #2) 5.45 A, 600 W
  - Gast Pump (MAB Atmozier) 5.45 A, 600 W
MAB-Concentrator Related Instruments
- Circuit 12B: 9.88 A
  - Soft-Ionization (MAB) HR-ToF-AMS 6.36 A, 700 W instrument
  - MAB Power supplies 0.53 A, 58 W
  - MAB Discharge Supply 0.25 A, 27.5 W
  - Concentrator Electronic Box 2.74 A, 300 W (estimated)
- Circuit 7: 15.7 A
  - Concentrator Chiller 10.45 A, 1150 W
  - Concentrator Saturator Heating Tape 5.24 A, 576 W
- Circuit 8: 15.21 A
  - TSI DMA #3 0.81 A, 90 W
  - CPC 3010 #2 0.3 A, 33 W
  - Gast Pump (by-pass for MAB) 5.45 A, 600 W
  - UV-APS 3.2 A, 350 W
Independent Circuit
- Circuit 9: 6.86 A
  - TSI Water CPC 3786 0.6 A, 66 W
  - TSI DMA #2 0.81 A, 90 W instrument
  - Gast Pump for Atomizer 5.45 A, 600 W

Updated(AMO 1635 PDT 16 May 2010)

Distribution of tasks while in the field

This is the MASTER list (not the one in Google Docs)
Power totals (Michael) -- also power table in field, sheets for borrowing parts
EI-AMS (Patrick, Amber)
- PAM (inc. SO2, O3, RH, MFCs) (Amber)
- Thermal Denuder (Amber -- Mike will train Jose)
MAB-AMS (Carly)
C-AMS (probably won't bring)
- if bring, don't plan to operate, keep pumped in trailer
- possibly Darin could ship if we're desperate
SMPS, CPC on Carly's Inlet (operated by Mike, data reduction in field Michael/Ingrid)
SMPS, CPC on Amber's Inlet (operated by Mike, data reduction in field Michael/Ingrid)
SMPS, CPC for calibration (operated as needed - AMS operator)
Calibration CPC for ambient data (Mike, data reduction in field Michael/Ingrid)
OPC (Michael w/Ingrid; igor code from Mike)
DustTrak w/ PM1 inlet (Michael w/ Mike)
TAG-AMS (Mike + Jose will support operation)
UHSAS (Ping would bring, Delphine?)
UV-APS (Alex could send, would do data)
Downloading data from other instruments and model, making graphs and posting them (Ingrid)
Uploading and plotting data in real-time: Ingrid, Donna
Support: Delphine

Logging & pumping summary

Logging computers: [duty cycles]
- Laptop 1: LabVIEW only, PAM inlet (best computer).
  - Ozone monitor [low]
  - Grimm [medium]
  - DustTrak [low]
  - RH monitor [low]
- Laptop 2: TSI AIM, PAM inlet
  - Long-column 3010-based SMPS system
- Laptop 3: LabVIEW only, PAM inlet
  - SO2 monitor (need more info on serial feed)
  - lamp control (ditto)
- Laptop 4: LabVIEW only, MAB inlet
  - TSI flowmeter on MAB SMPS [low]
  - Yellow switching valve system [low]
  - Can be one of the old black laptops
- Laptop 5: LabVIEW only, PAM inlet
  - Jayne switching valve system [low-medium]
  - TSI flowmeter on PAM SMPS [low]
- Labtop 6: TSI AIM, MAB inlet
  - Long-column 3786-based SMPS system (MAB)

Gast lab pumps
- Pump 1: 3010 scanning (ON MAB inlet - circuit 11, butanol exhaust)
  - dP >= 500mb
  - 1.0 lpm
  - hazmat exhaust
- Pump 2: 3010 fixed (calibration pump- circuit 11, butanol exhaust)
  - dP >= 500mbn
  - hazmat exhaust
- Pump 3: Combined bypass lines (circuit 8)
  - dP small
  - 0.65 (MAB-AMS) + 5.61 (Ambient Bypass)= 6.26 lpm
- Pump 4: PAM ancillary bypass (circuit 10a)
  - dP small
  - up to 1.7 (DustTrak) + 3.11-3.48 (PAM) + 0.6 (Valves Bypass) + 0.2 (PAM-AMS Inlet Bypass) = 5.66-5.98 lpm
- Pump 5: MAB cyclone bypass (circuit 8)
  - dP small
  - 9.0-10.0 lpm
- Pump 6: Perma-Pure dryer purge flow (circuit 10a)
  - dP ~ 100 mb
  - 5 lpm
  - 1.0 lpm
- Pump 7: Inorganic Atomizer (calibratin pump, circuit 9)
- Pump 8: Organic Atomizer (Circuit 11, propanol exhausted)

Tasks for Michael at the site

Immediately upon arrival at the site
- Check electrical connections with plug tester
- Label all the plugs in all trailers with the circuit number, if not already labeled.
- Make power budget sheet for each trailer, post prominently (Jochen may do ahead of time)
  - label every circuit at each trailer with circuit number and group
- Check all pumps with DustTrak and portable CPC (need to borrow from Suzanne Hering) as they are being installed.
- Post maps of Caltech and the local area, as well as hardware stores etc. in all trailers (next to door).
- Pick up rental car (minivan)

Not immediately, but during the study
- Collect samples of chiller water and the chemicals added to it. Discuss that people can sample them if needed. (Bring many small vials to distribute)
- Keep on top of butanol scrubbing for our CPCs

Rental Car

AVIS
Confirmation: 06665063US6
Pick up Tuesday May 4th @ 4:00 pm (close at 6pm)
Return Friday June 18th @ 9:00 am
570 North Lake Ave, Pasadena, CA 91101
Phone: 626.449.6122
Estimated Cost: $2,130.90

Rental Truck

Penske
Confirmation: 23002321
Pick up Saturday May 5th
Return June 19
2560 49th St. Boulder, CO 80301
Phone: 303.442.6481
Estimated Cost: $2,811.67

Housing

for 8 people (4 women, 4 men)
- Men
  - Jose L. Jimenez
  - Michael Lechner
  - Patrick Hayes
  - (Mike Cubison with Aerodyne)
- Women
  - Amber Ortega
  - Carly Robinson
  - Ingrid Ulbrich (arrive 5/19)
  - Delphine Farmer & Sanna until May 20; Raluca (from May 20)
  - (Donna Sueper with Aerodyne)
final confirmation late April
$133/night/apartment (2 apartments, 2 bedrooms each, 4 people/apartment)
- 1: 5/4-6/18 210 N. Hudson Ave., Apt.# 2307, Pasadena, CA 91011
- 2: 5/8-6/18 820 Locust St., Apt.# 3102, Pasadena, CA 91101
- Note: same apartment complex, two different buildings - it was the best they could do for us
- Location: City Place Apartments 801 E. Walnut St, Pasadena, CA 91101
- Updates: Housing Share with the Murphy Group from UToronto. Two night overlap during Ingrid's arrival before Deline's departure. Raluca from the Murphy group (UToronto) will share a room with J-Group ladies after May 20. Raluca and Amber will coordinate payment - Murphy group pay 1/4 of the J-group apt (~$33/night) for ~20 nights. (Amber calculate Raluca total and see if she can pay Oakwood directly for a number of nights at the end).

Difference between revisions of "CalNex-JG"

Latest revision as of 14:02, 6 August 2010

Contents

Tasks after CalNex-LA

Tasks in preparation for CalNex-LA

Power Breakdown for Jimenez Trailer at CalNex-LA

Distribution of tasks while in the field

Logging & pumping summary

Tasks for Michael at the site

Rental Car

Rental Truck

Housing

Navigation menu

Views

Personal tools

Navigation

Search

Tools

@@ Line 1: / Line 1: @@
 This page serves as documentation for organization of the Jimenez Group's participation in CalNex-LA. Do not confuse this page with [http://cires.colorado.edu/jimenez-group/wiki/index.php?title=CalNex-LA the Main CalNex-LA page] or the [http://cires.colorado.edu/jimenez-group/wiki/index.php?title=CalNex-LA_Logistics CalNex-LA Logistics page].
+== Tasks after CalNex-LA ==
+* Repairs & upgrades
+** Michael: quote on upgrade of 2x pump boxes (1 w/ 3x V301 controllers + higher rating of cables) & 2x automatic valves for inlet
+** Carly: check with Varian on interlock signal on V70-prog_as_V301 controller (now inside pump box controlling pump 5)
+** Michael: make sure we have 3x working RH probes and coupling hardware and that they work (working on it)
+** Patrick + Amber: fix 3 us offset with PToF in lab AMS (try rebooting multiple times). Talk to Donna about software. (working on it)
+** Patrick: calibrate all critical orifices, decide whether we need to order more (Waiting for Art to come back)
+** Michael: make a couple more orifice fixtures
+** Michael: replenishing O'Keefe orifices and fuses
+** Michael: identify big stand-alone tool chest (lockable)
+***[http://www.sears.com/shc/s/p_10153_12605_00910600000P?prdNo=1&blockNo=1&blockType=G1 Link]
+***Lockable
+***Deep and Shallow drawers
+***Ball Bearing drawer slides rated to 70lbs/drawer
+***other stackable components if expansion is ever necessary
+** Amber: Check channel 0 in Lab AMS slow board (and another channel)
+** Modules are switched between Lab and C TPS.
+** follow up on filament problem with TPS software (filament would go down) -- mention to Joel, try to reproduce
+* Completed Post CalNex-LA Tasks
+** Michael: Make map of east campus storage, and store location on group GPS
+** Michael: order 1 1000-Torr baratron (1/2" tube connection) for Lab AMS.
+** Michael: see when Varian guy is available after IAC (spinning, general pump stuff)
+** (Move them here as they are completed, so that we all know that they have been completed)
+** Carly: ask Thomas (cc Jose) where do we get special tool to remove module, and whether it is practical.
+** Carly: test interlock on HIAPER, it works
+** Amber + Patrick: clean lab AMS including fans (in pumps, electronics box, power supply, computer)
+** Carly: replace pulser flange
+** Carly: Replace MAB pump 5
 == Tasks in preparation for CalNex-LA ==
 * Field kit
-** broken UPS (new one ordered, old one to be sent out once new box arrives) & check all UPSs (in process): Delphine
+** SMPS comparison: Mike, Michael (run, analysis in progress)
-** CPC 3010: Mike (called TSI, need paperwork from Michael -> Mike, send this week)
+** plywood bases for Ingrid's shelving racks? (Michael, confirm with Jose)
-** Orifices: Michael (start 3/19)
+** inflatable mattresses (Jose will bring 2)
-** DMA Column: Mike (send back on Monday if not fixed by Mike on 3/19)
-** SMPS not scanning: Mike (analog problem?); could use in current state as calibration box
-** CPC comparison: Mike (tweaking labView code)
-** Sturdier foldable tables: Michael (Carly's guidance); still in process, have 2 to test ($59 each) get 4 more
-** Shelves + Racks: Ingrid (from home), Mike (from home), buy more?
-** add to the packing list things that don't go in boxes (tables, at least 7 chairs, etc.)
-** buy a large grey box for 3rd SMPS
 * Organization - Try to have ready by Mar 18 (next business mtg)
 ** Which AMSs to bring: MAB-AMS + LAB-AMS + C-AMS
-*** Follow up with Eben about LS: Mike (Jose emails Eben)
 ** AMS alternation: PAM + TD: on LAB-AMS
 *** Ambient: 1min V, 1 min W
 *** PAM: same
 *** TD: same
-*** Need to set up + test Jayne switching valves: Mike + Amber (Friday 3/19)
+*** Need to set up + test Jayne switching valves: Mike + Amber (in progress)
-*** concentrator: Sanna not sure if she can make it, she can send concentrator at least 2 weeks in advance: we will use w/ MAB (Jose will email Sanna)
+*** concentrator: Sanna will come 1st 2 weeks, she can send concentrator to CU in advance: we will use w/ MAB (Jose, Carly emailing with Sanna)
 *** Need a set of valves for concentrator: Carly w/ yellow - Amber will show her
-*** Need to be able to step vaporizer temperatures: Carly
+*** Need to be able to step vaporizer temperatures: Carly + Joel
-*** Inlet schematic for J-Group instruments: account for all fittings + tubing a priori: Carly + Amber (Delphine or Alex will dig out MILAGRO and/or BEARPEX). Include how to test for leaks and flows. Need to communicate
+*** Inlet schematic for J-Group instruments: account for all fittings + tubing a priori: (Mike in progress). Include how to test for leaks and flows.
-**** After assigning instruments to inlets, assign logging computers to instruments
+**** logging computers are assigned to instruments - DONE (Mike)
 ***** TSI software and Labview software can't run on the same computer
 ** Put together 2x valve filtering system for inlets (3): (Delphine) (valves/tees/etc. found, set aside)
 ** Which SMPSs
-*** One in parallel with Lab-AMS, one in parallel with MAB-AMS, one as shared calibration system ($Mike$ + Ingrid + Michael + Donna)
+*** One in parallel with Lab-AMS, one in parallel with MAB-AMS, one as shared calibration system (comparison in progress, see above: Ingrid + Michael + Donna)
-** PTRMS sharing for PAM: Amber will contact Martin.Graus@nooa.gov
+** OPC: Michael. software updated to report PM1, PM2.5, PM10; Mike has Igor code for analysis (see wiki)
-** OPC: Michael. Mike will tweak software to report PM1, PM2.5, PM10.
 ** Radioactive source and chemical inventory and shipping: Michael
-** Driving our stuff there: Michael will rent truck (Penske).
+*** waiting on Michelle; need to do reciprocity
+** Gas requirements (current plan is to bring everything from CU; Carly, Amber will make sure we have it for packing)
+*** zero air (1 tank at a time, probably 2 tanks total) - Amber
+*** N2 (3 cylinders) - Amber
+*** SO2 cal gas - Amber
+*** research-grade N2 - Carly
+*** research-grade Ar - Carly
+*** research-grade Kr (2 lecture bottles) - Carly
+** ICARTT sharing file organization (Ingrid + Donna)
+*** bother people about adding a sample file or readme saying they won't share data
+** Driving our stuff there: Michael will rent truck on Friday, get CIRES parking pass (Penske).
 *** pick up truck Saturday, May 1
-*** load Sunday, May 2
+*** load Sunday, May 2 at 10am Ingrid, Carly, Mike, Amber, Michael, Patrick, Art
 *** TO CalNex:  Michael + Amber, departing Boulder May 3, arriving Pasadena May 4
 *** FROM CalNex: Michael + Mike, departing Pasadena June 18, arriving Boulder June 19
-** Logging computers: Mike C.
 == Power Breakdown for Jimenez Trailer at CalNex-LA ==
+Will be updated when power is final - see google doc, ppt for latest
 * PAM-TD-AMS related instruments
-**Circuit 1: 13.64 A
+**Circuit 12A: 9.09 A
-***HR-AMS 6.36 A, 700 W instrument; 4.55 A, 500 W pumps
+***HR-AMS 6.36 A, 700 W instrument
 ***Thermo Denuder (TD) 2.73 A, 300W
-**Circuit 2: 13.95 A
+**Circuit 10B: 8.31 A
 ***PAM 6.8 A, 750 W (total, including lamp power supplies, MFCs, O3, RH, and SO2 monitors)
-***Grimm OPC 0.18 A, 20 W
+***Grimm OPC 0.2 A, 20 W
-***TSI SMPS #1 6.81 A, 750 W, inc pumps
+***TSI DMA #1 0.81 A, 90 W
+***CPC 3010 #1 0.3 A, 33 W
 ***DustTrak 0.16 A, 18 W
-*Shared Circuit
+*Shared Circuits
-**Circuit 3: 12.25 A
+**Circuit 10A: 12.9 A
-***Gast Pump (by-pass) 5.45 A, 600 W
+***Gast Pump for Perma Pure (by-pass) 5.45 A, 600 W
-***TSI SMPS #2 6.81 A, 750 W, inc pumps
+***Gast Pump for DT and OPC (by-pass) 5.45 A, 600 W
+***UHSAS 2 A, 220 W
+**Circuit 11: 16.35 A (butanol exhaust)
+***Gast Pump (CPC 3010 #1) 5.45 A, 600 W
+***Gast Pump (CPC 3010 #2) 5.45 A, 600 W
+***Gast Pump (MAB Atmozier) 5.45 A, 600 W
 *MAB-Concentrator Related Instruments
-**Circuit 4: 10.91 A
+**Circuit 12B: 9.88 A
-***Soft-Ionization (MAB) HR-ToF-AMS 6.36 A, 700 W instrument; 4.55 A, 500 W pumps
+***Soft-Ionization (MAB) HR-ToF-AMS 6.36 A, 700 W instrument
-**Circuit 5: 18 A
+***MAB Power supplies 0.53 A, 58 W
-***Particle Concentrator 18.18 A, 2000 W
+***MAB Discharge Supply 0.25 A, 27.5 W
-*Independent Instruments
+***Concentrator Electronic Box 2.74 A, 300 W (estimated)
-**Circuit 6: 13.22 A
+**Circuit 7: 15.7 A
-***C-ToF-AMS 6.36 A, 700 W instrument
+***Concentrator Chiller 10.45 A, 1150 W
+***Concentrator Saturator Heating Tape 5.24 A, 576 W
+**Circuit 8: 15.21 A
+***TSI DMA #3 0.81 A, 90 W
+***CPC 3010 #2 0.3 A, 33 W
+***Gast Pump (by-pass for MAB) 5.45 A, 600 W
+***UV-APS 3.2 A, 350 W
+*Independent Circuit
+**Circuit 9: 6.86 A
 ***TSI Water CPC 3786 0.6 A, 66 W
-***TSI DMA 0.81 A, 90 W instrument
+***TSI DMA #2 0.81 A, 90 W instrument
-***Gast	Pump (for CPC) 5.45 A, 600 W
+***Gast	Pump for Atomizer 5.45 A, 600 W
-*Note: We should request 7 circuits. Admittedly, forgot to include atomizer pump(s). Power will be evaluated again when more details are available for the Concentrator, MAB, and extra pumps (by-pass, calibrations, etc.) (AMO 22 March 2010)
+*Updated(AMO 1635 PDT 16 May 2010)
 == Distribution of tasks while in the field ==
@@ Line 79: / Line 130: @@
 ** Thermal Denuder (Amber -- Mike will train Jose)
 * MAB-AMS  (Carly)
-* C-AMS    (Not sure if we will operate)
+* C-AMS    (probably won't bring)
-** w/Light Scattering? (Not sure, depends on Eben)
+** if bring, don't plan to operate, keep pumped in trailer
+** possibly Darin could ship if we're desperate
 * SMPS, CPC on Carly's Inlet (operated by Mike, data reduction in field Michael/Ingrid)
 * SMPS, CPC on Amber's Inlet (operated by Mike, data reduction in field Michael/Ingrid)
 * SMPS, CPC for calibration  (operated as needed - AMS operator)
 * Calibration CPC for ambient data (Mike, data reduction in field Michael/Ingrid)
-* OPC (Michael w/Ingrid; igor code from Mike?)
+* OPC (Michael w/Ingrid; igor code from Mike)
 * DustTrak w/ PM1 inlet (Michael w/ Mike)
 * TAG-AMS (Mike + Jose will support operation)
@@ Line 93: / Line 145: @@
 * Uploading and plotting data in real-time: Ingrid, Donna
 * Support: Delphine
+== Logging & pumping summary ==
+* Logging computers: [duty cycles]
+** Laptop 1: LabVIEW only, PAM inlet (best computer).
+*** Ozone monitor [low]
+*** Grimm [medium]
+*** DustTrak [low]
+*** RH monitor [low]
+** Laptop 2: TSI AIM, PAM inlet
+*** Long-column 3010-based SMPS system
+** Laptop 3: LabVIEW only, PAM inlet
+*** SO2 monitor (need more info on serial feed)
+*** lamp control (ditto)
+** Laptop 4: LabVIEW only, MAB inlet
+*** TSI flowmeter on MAB SMPS [low]
+*** Yellow switching valve system [low]
+*** Can be one of the old black laptops
+** Laptop 5: LabVIEW only, PAM inlet
+*** Jayne switching valve system [low-medium]
+*** TSI flowmeter on PAM SMPS [low]
+** Labtop 6: TSI AIM, MAB inlet
+*** Long-column 3786-based SMPS system (MAB)
+* Gast lab pumps
+** Pump 1: 3010 scanning (ON MAB inlet - circuit 11, butanol exhaust)
+*** dP >= 500mb
+*** 1.0 lpm
+*** hazmat exhaust
+** Pump 2: 3010 fixed (calibration pump- circuit 11, butanol exhaust)
+*** dP >= 500mbn
+*** hazmat exhaust
+** Pump 3: Combined bypass lines (circuit 8)
+*** dP small
+***  0.65 (MAB-AMS) + 5.61 (Ambient Bypass)= 6.26 lpm
+** Pump 4: PAM ancillary bypass (circuit 10a)
+*** dP small
+*** up to 1.7 (DustTrak) + 3.11-3.48 (PAM) + 0.6 (Valves Bypass) + 0.2 (PAM-AMS Inlet Bypass) = 5.66-5.98 lpm
+** Pump 5: MAB cyclone bypass (circuit 8)
+*** dP small
+*** 9.0-10.0 lpm
+** Pump 6: Perma-Pure dryer purge flow (circuit 10a)
+*** dP ~ 100 mb
+*** 5 lpm
+*** 1.0 lpm
+** Pump 7: Inorganic Atomizer (calibratin pump, circuit 9)
+** Pump 8: Organic Atomizer (Circuit 11, propanol exhausted)
 == Tasks for Michael at the site ==
@@ Line 99: / Line 197: @@
 ** Check electrical connections with plug tester
 ** Label all the plugs in all trailers with the circuit number, if not already labeled.
-** Make power budget sheet for each trailer, post prominently.
+** Make power budget sheet for each trailer, post prominently (Jochen may do ahead of time)
+*** label every circuit at each trailer with circuit number and group
 ** Check all pumps with DustTrak and portable CPC (need to borrow from Suzanne Hering) as they are being installed.
 ** Post maps of Caltech and the local area, as well as hardware stores etc. in all trailers (next to door).
@@ Line 128: / Line 227: @@
 === Housing ===
 * for 8 people (4 women, 4 men)
+** Men
+*** Jose L. Jimenez
+*** Michael Lechner
+*** Patrick Hayes
+*** (Mike Cubison with Aerodyne)
+** Women
+*** Amber Ortega
+*** Carly Robinson
+*** Ingrid Ulbrich (arrive 5/19)
+*** Delphine Farmer & Sanna until May 20;  Raluca (from May 20)
+*** (Donna Sueper with Aerodyne)
 * final confirmation late April
 * $133/night/apartment (2 apartments, 2 bedrooms each, 4 people/apartment)
-** 1: 5/4-6/18
+** 1: 5/4-6/18 210 N. Hudson Ave., Apt.# 2307, Pasadena, CA 91011
-** 2: 5/8-6/18
+** 2: 5/8-6/18 820 Locust St., Apt.# 3102, Pasadena, CA 91101
-* Confirmed Group Members: Jose L. Jimenez, Carly Robinson, Amber Ortega, Mike Cubison, Michael Lechner, Patrick Hayes, Delphine Farmer, Ingrid Ulbrich
+** Note: same apartment complex, two different buildings - it was the best they could do for us
-* Requested Preferences:
 ** Location: [http://tinyurl.com/CityPlaceApts-Oakwood City Place Apartments] [http://tinyurl.com/CityPlaceApts 801 E. Walnut St, Pasadena, CA 91101]
-** Amenities: Top/high floor units, facing garden/pool (not street)
+** Updates: Housing Share with the Murphy Group from UToronto.  Two night overlap during Ingrid's arrival before Deline's departure. Raluca from the Murphy group (UToronto) will share a room with J-Group ladies after May 20. Raluca and Amber will coordinate payment - Murphy group pay 1/4 of the J-group apt (~$33/night) for ~20 nights. (Amber calculate Raluca total and see if she can pay Oakwood directly for a number of nights at the end).
-** Updates: Housing Share with the Murphy Group from UToronto. J-group ladies apt will have: Carly, Amber, Ingrid, + (Sanna or Delphine until May 20) + Raluca (from May 20 onwards). The Murphy group (UToronto) will have one apartment in the same complex, with Jen + Raluca + (Sanna or Delphine) until May 20. Raluca and Amber will coordinate payment - Murphy group pay 1/4 of the J-group apt (~$33/night) for ~20 nights (30 nights in the J-group apt minus the ~10 nights Sanna or Delphine will share with the Murphy group).