FAQ AMS Glossary

This is a glossary of terms and acronyms typically used by the AMS community. It is a work in progress - so is by no means complete or comprehensive. Please continue to add and edit!

Hardware and Data Acquisition

• AMS: Aerosol Mass Spectrometer. In our community it always means the Aerodyne AMS, but a few other groups have named other instruments "AMS", which are unrelated to the Aerodyne AMS.

• CRiTTR: Piece of software to run the pulsers and move the chopper independently of the AMS Data Acquisition software (DAQ)

• DAQ: Data Acquisition Software

• SP-AMS: Soot Particle AMS. New instrument developed which combines the SP2 (Single Particle Soot Photometer) particle vaporization and the AMS ionization and mass spectrometry.

Analysis Software and Results

• APES: Analytic Procedure for Elemental Separation. An Igor tool for performing an elemental analysis (i.e. O/C ratio). In Pika 1.07 most of this code was merged with the pika code, but a version of APES remain as a stand-alone Igor code.

• Background: In general this term should be avoided as it is too ambiguous. (Background ambient measurement conditions? Background instrumental signal? etc.) The use of 'Closed mass spectra' is encouraged where appropriate.

• Baseline: In a mass spectra, the 'region between the peaks' for an open, closed or difference mass spectra.

• Closed: The mass spectrum taken with the chopper in the 'blocked' position, and typically considered instrument background and gas-phase contribution to AMS signal

• Diff: The Difference Spectrum; difference in chopper-open mass spectrum and chopper-closed mass spectrum; typically considered the mass spectrum due to particle signal

• f_x: the fraction of the total organic signal that is observed at m/z = x. E.g. f_44 is the fraction of the total OA signal at m/z 44. Sometimes also written as 44/Org or 44/OA.

• fragments: a vaporized molecule is ionized in the AMS to a series of ions, which are then detected by either a quadrupole or time-of-flight mass spectrometer; the resulting ions are referred to as 'fragments'

• Non-refractory (NR) species: chemical components of aerosol that are volatilized in the AMS, and are observed in the "Difference spectrum". This requires evaporation in a time scale shorter than chopper open/closed movement, whish is typically 3-5 seconds. Examples include the usual AMS species: sulfate, nitrate, ammonium, chloride, and organic (OA). Note that these species can also have some semi-refractory signal, although this is typically a small fraction (5-10% of the NR signal under typical operating conditions).

• Refractory species: chemical components of aerosol that are not volatile enough to vaporize in the AMS in a time scale of at least a few hours, and thus are never observed by the instrument. Examples include black carbon (see SP2-AMS).

• Semi-refractory(SR) species: chemical components of aerosol that are relatively less volatile, and only slowly vaporize in the AMS. Functionally, they are observed in both the the Closed and Open signals (time-scale for vaporization is much longer than the time scale of open/closed chopper movement). Examples include some chemical forms of Pb (lead) and possibly NaCl.

• HR: High Resolution (as opposed to UMR, typically referring to either the High Resolution Time of Flight Aerosol Mass Spectrometer, or to the data derived from that instrument)

• ipf: Igor Procedure File

PMF-Related

• BBOA: Biomass Burning Organic Aerosol

• HOA: Hydrocarbon-like Organic Aerosol

• Light Scattering:

• LV-OOA: Low volatility-oxygenated organic aerosol

• OOA: Oxygenated Organic Aerosol

• Open: Mass spectra acquired when the chopper is in the 'open' position - both air and aerosols are entering and being detected

• PET: PMF Evaluation Tool. An interface for examining the results of many PMF analyses.

• PIKA: Peak Integration by Peak Analysis. This is a somewhat contorted acronym, but this name really indicates "High Resolution Analysis" or HR analysis where individual peaks (C3H6 and C2H2O at ~ m/z 42).

• PMF: Positive Matrix Factorization

• Q: This has two uses. Q often refers to a quadropole AMS. But Q and Qexp are terms also used in a PMF analysis.

• SPARROW: Single PARicle Retrieval Of Waves. The Igor analysis tool for AMS light scattering data.

• SQUIRREL: SeQUential Igor data RetRiEvaL. The Igor analysis tool for non-Quad AMS data.

• SV-OOA: Semi-Volatile Oxidized Organic Aerosol

• ToF: Time of Flight mass spectrometer

• UMR: Unit Mass Resolution (as opposed to HR: ie, signal observed at m/z 28 is UMR, whereas HR data typically shows two peaks, one from N2+ and another from CO+)