Windows

You will need the original Reflect from your CD for this update. You have to create an environment variable showing where the software is installed to have the update run correctly (instructions in the Readme). Please be sure to read the ReadMe file included to update properly! Please contact me if there are any problems with the updater.

Download the Reflect 1.0.6 updater (2.9 Mb, 1/10/12)

Mac

Note that after reading the information that opens when you first open the updater, you have to close that information window in order to update your old copy of Reflect. You will need to have a copy of Reflect on your hard drive (you cannot update a copy on the CD itself).

Download the Reflect 1.0.6 updater (Intel only) (3.8 Mb, 1/10/12)

Download the Reflect 1.0.5 updater (last PPC compatible update) (6.4 Mb, 1/10/12)

Release notes

v. 1.0.1--Recompile RB2010r3.1, add Unihelp 4.

v. 1.0.2

• Removed bug where layer dips were not being removed if imported from Refract.
• Removed bug if opening a model file with data window open and reflections selected.
  

v. 1.0.3

• Fixed error in units of two-way travel time in info pane in Fit Window.
• Compile RB2011r3
• Should find Help folder on WIndows machines.
• Fixed problem if specified font was missing.
• Preferences now saved between runs.
• Universal binary should run under Mac OS 10.7

v1.0.4

• Fixed opening/saving model file if units had been changed from defaults (old model & data files are read assuming units are meters, m/s and ms).
• Fixed defaults so that time units can be changed properly.
• Removed 1.0.3 bug crashing if units were non-default at previous close.
• Fixed i/o so model and data files are read back in with the proper values even if the units are now different.
• Labels have proper units in data window.

v1.0.5

• Fixed error in RMS thickness in Fit Window (was factor of 2 too large).
• Fixed error in "Model from Picks" when units of km were used.
• Horizontal scrollbars now available in Data Window if needed
• Dirty mark indicating file modified added
• Default model name changed to MyReflectModel
• User prompted to confirm overwriting unsaved model or data when opening a new file

v1.0.6

• Compile RB2011r4 (no PPC code, better Lion support?, smaller executable)

Return to Geophysical Software Suite main page

C.H. Jones homepage